The dimensions of a rugby pitch in metres m are usually m from goal line to goal line try line to try line and a width of 70m. The layout also has an additional m at each end for the in-goal area, measured from goal line to dead-ball line. Rugby pitch dimensions can vary. The length of a rugby pitch can be between m m including the in-goal areas and the width can be between m. Bearing in mind that the minimum and maximum rugby field dimensions, the playing area can be between 7,, sq m. The minimum size of a rugby pitch is m.
This is 94m from goal line to goal line, plus 6m at each end for the in-goal areas. The width must be at least 68m, meaning that the minimum playing area possible is 7, sq m. The length of a rugby pitch can vary. It is typically m from goal line to goal line but can be as short as 94m. An in-goal area at each end of m means the total length is m. In world rugby rules, a rugby field must be a minimum of 68m from touchline to touchline but can measure up to 70m wide.
The technical areas are typically where the coaching staff, replacement players and water carriers are housed. It is also known as the sin bin, as players that receive a yellow card must retire here for 10 minutes before they can re-join the game. The technical areas must be at least 1m back from the touchline and no more than 10m long. Rugby pitch markings may seem complicated at first but are relatively straightforward to understand and replicate.
The marking dimensions for the main solid white lines are below:. The markings on a rugby pitch set out the playing areas and positions relevant to certain rules. The following are marked with solid white lines. The touchline runs lengthways on either edge of a rugby pitch and mark the edge of the field.
In some sports, this is known as a side line. When the ball passes over this line, it is out of play. The touch-in-goal line is a continuation of the touchline at both ends of the field and marks out the boundary of the in-goal area. The goal line runs across the width of the pitch perpendicular to the ends of the touchlines. It is also known as the try line. A try is a way of scoring and happens when the ball is 'grounded' or touched to the pitch between the goal line and dead-ball line also known as the in-goal area.
The goal posts are in the middle of the goal line. Teams can also score points by kicking the ball over the cross bar drop goal. The metre lines are marked in solid white. If the opposition have the last touch before the ball travels over the metre line, the attacking team can kick it forwards and over the touchline — the game will restart at the point at which it went out of play.
Steel posts are heavier than aluminium alternatives and are therefore an excellent choice for amateur rugby teams due to their strength and the cost advantage they provide. Steel rugby posts are suitable for open spaces and parks as these require a slightly more robust material and usually a socketed fixing. This is largely due to the risks of potential misuse which is harder to cause using steel posts.
Ultimately, this rugby post material is an even more durable option. The fixing will determine how your rugby goals will be socketed. Whether or not the post can be removed depends on which fixing you choose. Your choice will also give you different levels or safety. Hence, selecting the right fixing is crucial, particularly for school or club use. As a general rule, you should choose socketed rugby goals for safe installation.
Permanent goals or those that stay in place for prolonged periods will have a standard socket set in concrete. You must then simply slot the post into the socket. For certain clubs, they just prefer to have an easier way to erect the goals. This is done by adding a hinge adapter to the posts. This sits flush with the ground and allows the goals to move 90 degrees.
Good To Know: We also supply a Hinged Post Roller Assembly , replacement sockets and rugby post protectors for help with installing and protecting your post. The final step is to choose your rugby post height. This is mainly governed by the type of use you expect from it. For example, you may require different dimensions for training from the dimensions you want for competitions. Other aspects of usage to consider include where the posts are being situated and, finally, the age group who will be using your goal posts.
This will allow you to cater for youth players. Flag posts must be positioned in line with the 22m lines and the half way line, 2m outside the touchlines and within the playing enclosure.
The maximum playing area is 50m long and 25m wide quarter field. The field of play is a maximum of 40m long. The maximum playing area is 70m long and 35m wide half field. The field of play is a maximum of 60m long. The maximum playing area is m long and 60m wide full field minus 10m width. The field of play is a maximum of m long. The maximum playing area is m long and 60m wide full field.
Laws of the Game Rugby Union incorporating the playing charter World Rugby. Dublin 2, Ireland. Australian Rugby The information in this guide is general in nature and cannot be relied upon as professional advice concerning the design of, or marking out for, sporting facilities and playing areas.
No assurance is given as to the accuracy of any information contained in this guide and readers should not rely on its accuracy. Readers should obtain their own independent and professional advice in relation to their proposed sporting activity.
Close menu. Main navigation. Rugby union. Regulation field The ground The field of play is the area between the goal lines and the touchlines. Dimensions of the field of play The field of play is no more than m long and 70m wide.
0コメント